Phenolic Plywood Birch light brown

Thuiswinkel Waarborg

Configure Phenolic Plywood Birch light brown

Product information

  • Moisture proof
  • Flat surface
  • Very strong
  • Suitable for construction purposes
  • The edges of the board and any drill holes must be adequately protected against the penetration of moisture.
  • The top layer may vary in colour per board
  • Scratch sensitive

Description

Birch betonplex is known for being very flat. It consists of birch plywood with a plastic layer on top and bottom, which makes the board suitable for many applications. In this variant the top layer is light brown. The board is suitable for intensive use. Betonplex does not need to be finished, so you can get straight to work! Do pay attention to the ends; these do need to be treated in damp conditions.

Read more

Product properties

Specific gravity (kg/m3)650
AppearanceSilk gloss
Visual gradingBB/BB
Thickness12 mm, 15 mm, 18 mm, 9 mm
Type Phenolic Plywood
VariantPhenolic Plywood Birch Light Brown
Application (climate)Outside, if pre-treated
Wood type of surface layerBirch
Functional useBouw- en timmerhout
ColourRed-brown / Orange
PrimedNo
BondingWBP, Exterior
Quality markFSC® mix 70%
Sheet structureMultiple layers
Top layer typePhenolic coating
Top layer2 sides

Applications

  • Bodywork construction
  • Structural work
  • Interior panelling
  • Floor and wall covering
  • Façade cladding
  • Slides
  • Storage areas
Thuiswinkel Waarborg

Order light brown custom concreteplex online

Phenolic Plywood Birch is a strong board material with a tight, light brown melamine top layer. This Phenolic Plywood, also known as multiplex board material, is suitable for visible work and, with its smooth birch edges, is a much-chosen wood type for making furniture. Order concreteplex birch light brown to measure, sawn or milled to the millimetre. There are various shapes and finishes available per thickness. View all possibilities in the product configurator.

Phenolic Plywood Birch light brown: what is it?

Phenolic Plywood consists of plywood with a special, light-brown synthetic layer (phenol) on top and underneath. This is a very smooth and water-resistant layer, so that the board can be used for applications that have to withstand rough handling. This makes the board suitable for many applications and for intensive use. Good to know: the colour of the top layer can differ per board.

Phenolic Plywood does not need to be finished, so you can start right away! The inner plywood layer of this board is made of birch wood, so the board is always very flat. The plywood is glued water-resistant, but despite that it is still important to treat the front sides with an edge sealer, so that the moisture-resistant properties are reinforced.

Available thicknesses of light brown concrete plywood

With us you can order customised light brown concreteplex of high quality in various thicknesses. You can easily specify the desired thickness in the product configurator. This way you can be sure that the panel material meets your requirements: both the format and thickness of the material. The following thicknesses are available: 9 mm, 12 mm, 15 mm and 18 mm.

Processing of light brown concrete plywood panels

Phenolic Plywood is mainly used for formwork to pour concrete into. Due to its smooth and hard top layer, the product is perfectly suited for this purpose, which is why it gets its name. Because the plastic layer is very strong and waterproof, it can also be used for other applications. For example, it can be used to clad commercial vehicles, furniture, playground equipment, an animal cage or a slide. But also as information board or in stand construction, Phenolic Plywood Birch is used. It is important that the edges and (screw) holes of concreteplex are properly finished with epoxy filler and/or an edge sealant.

Concreteplex falls in the category of constructive boards. The plate material is very strong and ideal for constructive purposes. However, plywood with a phenolic resin top layer like concreteplex birch light brown is very sensitive to scratches. Take this into account when choosing the right board!

Specific applications of concreteplex

Because of the synthetic layer on both sides, Phenolic Plywood Birch can take a beating. Phenolic Plywood is mainly used for formwork to pour concrete into. Therefore it owes its name. Phenolic Plywood Birch is mainly used for this purpose because the sheet is always very flat. But because the plastic layer is very strong and waterproof, it can also be used for other applications. Think for example of upholstery for a company car, animal shelter or a slide. Because of the light brown colour, Phenolic Plywood Birch light brown is also often used in the stand construction.

Alternatives to light brown concrete plywood panels

Is Phenolic Plywood Birch light brown not the right panel for your job? Go for unfinished plywood birch or for plywood birch white. Also anti-slip concrete plywood is a good alternative when you are looking for strong concrete plywood with a slip-resistant and mesh-resistant top layer. Or take a look at our other types of phenolic plywood:

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects