MDF Walnut crown cut veneer

Thuiswinkel Waarborg

Configure MDF Walnut crown cut veneer

Product information

  • Fibreboard with a natural, wooden appearance
  • Finished with a veneer of walnut sawn from a single cut veneer
  • Easy to work with
  • Strong material with high bending strength
  • For indoor use only

Description

is a blank MDF board with a dark, natural look, thanks to its wood veneer top layer. This layer is made of cubic walnut veneer, in which the wood structure is clearly visible. The top layer still needs to be treated for optimal use.

Read more

Product properties

Specific gravity (kg/m3)750
AppearanceNatural
Visual gradingA/B
Thickness4 mm, 19 mm, 26 mm
Type MDF Veneered
VariantMDF Walnut crown cut veneer
Application (climate)Indoors
Wood type of surface layerWalnut
CoreMDF
Functional useDecorative
ColourBeige / Brown
Colour shadeNatural / None
SidesYes
PrimedNo
BondingMR, Interior
Sheet structureFibreboard
Top layer typeVeneer layer
Top layer2 sides

Ordering customised MDF Walnut crown cut veneer boards online

Order cut-to-size MDF Walnut crown cut veneer sheets easily online. Veneered MDF can be sawn to size up to the millimetre. We deliver the panel fully customised to your home. Are you curious about the possibilities? Configure your product, and you will have your project ready in no time.

MDF Walnut crown cut veneer: what is it?

MDF is a popular board material that can be used for countless projects. MDF veneered is the standard MDF board with a top layer of wood sawn in doses. The top layer is meant to be kept in sight; the bottom layer is made of technical veneer and is meant to reinforce the board. Because the core of these panels is made of MDF, this panel material is also good and easy to assemble. That is really handy!

MDF Walnut crown cut veneer, board material with a natural top layer

Unlike melamine faced board material, the top layer of veneered panels is a layer of real wood. This gives the material a calm, natural look. Because it is a natural product, there may be differences in colour and structure between different panels. No two panels are the same. In addition, it is important that this panel is finished with a varnish or oil as desired. This prevents discolouration and preserves the top layer. 

The great advantage of veneered board material compared to solid board material is that it does not warp. The MDF core of this board material gives it the advantages of MDF, but the appearance of solid and natural wood. 

Walnut veneered

Walnut has a sturdy appearance and its colour varies from light greyish brown to warm dark brown. The wood generally has dark markings with black stripes. It generally has a regular appearance, but also contains tangled or wavy drawings. The grain can be described as fine to moderately coarse. The top layer is real wood, which means that this wood discolours over time. This is reinforced when exposed to daylight. It is therefore important to finish walnut with a varnish or oil.

Crown cut or Quartered veneer

Cutting logs is usually done in two different ways: crown / plain or kwartiers. When the wood is cut crown / plain, long slices are cut lengthwise. This allows the flames of the material to be clearly seen and makes the best use of the wood. When the wood is kwartiers cut, it is cut with the grain. This gives kwartiers sawn timber a calm appearance and relatively straight lines. In mix, these two techniques are processed interchangeably and used during the compilation of the veneer. This creates a natural whole and makes each slab unique.

Available thicknesses of MDF Walnut crown cut veneer

With us, you can order customised, high quality veneered MDF in various thicknesses. You can easily specify the desired thickness in the product configurator. This way, you can be sure that the panel material meets your requirements: both the format and the thickness of the material. The following thicknesses are available: 4 mm, 19 mm and 26 mm.

Machining veneered MDF boards

The board consists of wood fibres that are compressed under high pressure. This makes the material easy to process. When milling or sawing, this board material does not splinter. The fibres are held together by resin. Therefore, it is important to degrease the board properly before varnishing it. Veneered MDF is only suitable for indoor applications and in dry conditions.

Due to sawing, the edges are 'open'. These still need to be finished, which can be done using veneer tape. 

Specific applications of veneered MDF

MDF is the material of choice for furniture and interior applications. Veneer MDF, also known as veneer MDF, is a widely usable board that is suitable for various interior applications. A door, a casing for pipes, a bookshelf, a TV cabinet and a partition are just a few examples of the application possibilities of veneered MDF. The homogeneous structure makes MDF, in comparison to other board materials, less susceptible to shrinking and expanding at varying temperatures. MDF veneer is not suitable for applications in damp spaces or outdoors.

Alternatives to MDF Walnut crown cut veneer boards

Is MDF Walnut crown cut veneer not the right timber species for your job? Looking for board material with a different structure? Then go for poplar plywood. Want sheet material that can be used outdoors? Then take a look at phenolic plywood, MDF tricoya or multiplex okoume. Or view our other MDF board materials here:

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects

Similar products

Complete your project