Wooden grate for a convector well, by Bo

Related projects
TOSIZE Furniture
Create DIY projects in a breeze!
Logo TOSIZE.ie
Start designing

Create this project yourself with sheet material cut to size by TOSIZE.ie!

Bo

Bo

NL

Above average

1 minute

Description

Wooden grid for the convector pit consisting of 3 parts Birch plywood 27 mm. The plastic bushings of the old convector pit grille were partly broken and the gaps between the slats were just large enough for your chair legs to collapse. To solve both problems, new grilles have been made from plywood.

Work description: how did you realize your project

Order panels in the right size and make a milling jig at home.

Ensured that the number, width and position of the slots are the same. This way you get a symmetrical result.

Slots are first milled out shallowly with a router and then a hole is drilled in each slot. The rest was cut out with a jigsaw.

The inside of the slots and the outer edges were sanded, then coated with 3 layers of PU lacquer.

Final size: What are the outside dimensions?

Final size: What are the outside dimensions?

Final size: What are the outside dimensions? h3>

278.4 cm x 34.8 cm x 2.7 cm (l x w x h)

Tip! Also check out our handy DIY tips!

What now?

Want to make this DIY project? Check out Bo's saw list and complete your order easily.

€ 271,86


All materials used

Explanation

View all sheet materials