DIY shoe and wardrobe cabinet made of primed MDF, by Mathijs

definition

A cupboard at the front door where shoes, children's coats and scarves / hats can be stored. Because our ground floor is completely open and the back of the cabinet is visible, the back also had to be finished and not too boring

Work description: how did you realize your project

Attached drawing of project (front and side view and order list shelves). First the cabinets on the sides (with compartments for shoes). All connections pre-drilled and screw heads countersunk. The small planks E are fixed in the middle upright plank A via dowels. Then the two cabinets joined together by building a center piece between them. Also here where possible with countersunk screw connections, but if necessary with dowels. Firmness comes from planks at the back and 8 small corner profiles at the bottom of plank D. Finishing based on filler, touch up primer and 3 layers of lacquer

Final size: What are the outer dimensions?

Lxbxh is 150.8 x 41.8 x 112.6 cm