Phenolic Plywood eucalyptus dark brown

Phenolic Plywood eucalyptus dark brown order customised boards online

Phenolic Plywood can certainly be the right choice for a wide variety of projects. It is a real powerhouse. We cut or mill Phenolic Plywood birch to full size and millimetre accuracy in various shapes and with different finishes to make your job a success. View all possibilities in the product configurator. We deliver the material to your home within a few working days.

Phenolic Plywood eucalyptus dark brown: wat is dat?

Phenolic Plywood eucalyptus dark brown is known for being very flat. It consists of eucalyptus plywood that is interior glued, and is finished with a plastic epoxy layer (phenol coating) on the top and bottom. This makes the board suitable for many applications. These top layers are also called a film.

As the name suggests, concrete plywood eucalyptus is composed of eucalyptus veneers. Eucalyptus is not a specific species of tree, but a genus. Eucalyptus can adapt well to different climate zones and locations and is also fast-growing to which it owes its popularity. The veneer layers are interior glued by cross-linking. The cross-linking of the veneer layers makes the board stronger and prevents warping. However, it remains a wooden core, which is why betonplex can warp.

The plastic top layer of this board material has a dark brown to black colour. A universal colour purely for constructional purposes. The board is suitable for intensive use. The top layer of Phenolic Plywood needs no finishing, so you can get straight to work!

Available thicknesses Phenolic Plywood eucalyptus dark brown

Phenolic Plywood eucalyptus dark brown is available in different thicknesses and with various topcoat colours. Easily specify the desired thickness when configuring Phenolic Plywood eucalyptus dark brown. Phenolic Plywood eucalyptus dark brown can be ordered in the following thicknesses: 18 mm.

Editing Phenolic Plywood eucalyptus dark brown panels

Phenolic Plywood eucalyptus dark brown is easily machined due to its eucalyptus core. Phenolic Plywood eucalyptus dark brown is characterised by its phenolic resin top layer. The material is not suitable for use in damp areas. Are you going to use this material for one-off phenolic formwork? If so, it is important to countersink the edges and (screw) holes of Phenolic Plywood  (at least 2 mm) and finish them well with epoxy filler and finish the edges well with an edge sealer. Do not over-tighten carriage bolts. The top layer needs no further aftertreatment. Phenolic Plywood may splinter during assembly. Use sharp tools and screw preferably at least 2.0 cm from the edges.

Specific applications Phenolic Plywood eucalyptus dark brown

Phenolic Plywood is mainly used for formwork for pouring concrete. Because of its smooth and hard top layer, the product lends itself perfectly to this and owes its name to it. Because the plastic layer is very strong and waterproof, it can also be used for other applications. Think, for instance, of disposable pallets, packaging purposes, simple carpentry work that is not subjected to much stress or other wall coverings that are not used for load-bearing purposes.

Phenolic Plywood falls into the category of structural boards. The board material is very strong and ideal for constructive purposes. Sheet material with a phenolic resin top layer such as Phenolic Plywood birch dark brown is very scratch-sensitive.

Alternatives to Phenolic Plywood panels

Is Phenolic Plywood eucalyptus dark brown not the right sheet material for your job after all? Go for unfinished plywood birch or for plywood birch white. Also anti-slip concrete plywood is a good alternative if you are looking for strong Phenolic Plywood with a non-slip and meshwire top layer. Or check out our other types of Phenolic Plywood .