Plywood Birch HPL white

Order cut-to-size Plywood Birch HPL white online

Order cut-to-size Plywood Birch HPL white easily online. Multiplex met een HPL-toplaag can be sawn to size down to the millimetre. We will deliver the panel to your home within a few working days. Are you curious about the possibilities? Configure your product and complete your project quickly and easily.

Plywood Birch HPL white: what is it?

Birch plywood, the core of this board material, is the most popular variant of plywood board material for indoor use because it is the best quality choice. It is glued water-resistant as standard and moreover birch is a hardwood species. It can therefore take a beating!

Birch plywood is made up of different layers of birch veneer. These layers are glued crosswise to each other. This results in a stable board and a very attractive edge. Nevertheless, the wood remains glued together, during the sawing and processing of plywood birch tension can be released. It is therefore important to always fix this panel material.

Plywood Birch HPL white, panels with an HPL topcoat

HPL stands for High Pressure Laminate. It is made by pressing several layers of paper together with a thermosetting synthetic resin. The material is scratch and impact resistant. The structure of HPL is composed with a computer. Therefore, each panel is the same and there is no visible difference in colour or pattern. Panels can be finished with an HPL top layer on one or both sides, see the product properties for more information.

Available thicknesses of Plywood Birch HPL white

With us, you order customised MDF with an HPL top layer of high quality and often in different thicknesses. You can easily specify the desired thickness in the product configurator. This ensures that the board material meets your requirements. The following thicknesses are available: 19.6 mm.

Machining plywood birch boards with an HPL topcoat

Plywood is an easy panel material to work with, if you have sharp tools. For drilling holes, we recommend a wood drill with a centre point. Pre-drilling is also recommended for this panel material. Therefore, have it professionally sawn to size by us, to guarantee a smooth result. The edges are 'open' by sawing. These still need to be finished, which can be done with ABS tape.

HPL is a finished top layer. The advantage of this is that you do not need to paint or finish it. Therefore, plan the assembly in advance: it is more difficult to conceal the joints afterwards. Think for example of assembly from the bottom or the inside.

Specific applications of plywood birch with an HPL top layer

Birch plywood with an HPL top layer is a popular choice for furniture and interior applications. The fine edge that remains open during sawing gives this panel a unique appearance. That is why plywood with an HPL top layer is ideally suited for table tops, kitchen cupboards, counter tops and desktops. However, plywood can warp when tension is released during sawing or processing, so we always recommend fixing this panel material. But that does not make it any less of a favourite for making furniture in general. So don't be limited by this list of examples!

Alternatives for birch plywood CP/CP with an HPL top layer

Is Plywood Birch HPL white  not the right type of wood for your job? If you are looking for plywood for outdoor use plywood okoumé waterproof is a good alternative. Looking for a different look? Or have a look at our other plywood panels with an HPL top layer: