Underlayment Radiata Pine B/C

Thuiswinkel Waarborg

Configure Underlayment Radiata Pine B/C

Product information

  • Gemakkelijk te bewerken en te monteren
  • Geschikt voor gebruik in vochtige ruimtes
  • Dragende functie
  • Sterk plaatmateriaal
  • Door de grove structuur kans op splinteren
  • Niet geschikt voor decoratieve toepassingen

Description

Underlayment is a structural board that is primarily used as a subfloor. That is also where it gets its name. But in the meantime, the board is used for many more applications. Think, for example, of walls and roofs. This underlayment variant (B/C) was developed for constructive purposes.

Read more

Product properties

Specific gravity (kg/m3)650
AppearanceNatural
Thickness9 mm, 12 mm
Type Underlayment
VariantUnderlayment Radiata Pine B/C
GrainYes, lengthwise
Application (climate)Indoors
Wood type of surface layerSoftwood
Functional useConstruction and lumber
ColourBeige / Brown
SidesYes
PrimedNo
BondingWBP, Exterior
Quality markFSC® mix 70%
Sheet structureMultiple layers
Top layer typeUnfinished

Underlayment Radiata Pine B/C panels ordered online

Underlayment Radiata Pine B/C is a construction board that is primarily used as a subfloor. This is how it got its name. But because the plate is so strong, it is also often used for walls and roofs. Underlayment has moisture-resistant properties, making it more resistant to moisture than birch plywood.

Order your sawn-to-size Radiata pine panels easily online. Underlayment can be sawn or milled into various shapes. The most popular shape is a rectangle, but we also cut circles, ovals, hexagons or even parallelograms to size. Do you want your do-it-yourself project neatly finished? Then choose one of the available (edge) finishes.

Underlayment Radiata Pine B/C: What is it?

Underlayment Radiata pine is a plywood made from pine wood. Underlayment has a number of unique properties compared to other panel materials. This plate material is very strong, resilient and can carry a lot of weight. The slight markings of the softwood give it a natural look. Our underlayment sheets are only suitable for horizontal applications, such as table tops, window sills, etc. These boards are not suitable for vertical projects such as doors and room dividers.

Like other types of plywood, Radiata pine underlayment consists of several layers of wood veneer. These layers are glued together crosswise, which makes the panel very strong. This results in a stable board. The ends are attractive due to the layers and are often kept in sight.

The direction of the wood grain

With underlayment, a wood grain is visible. The drawing of the wood grain always runs lengthwise. When sawing the board, we maintain that the length measure is also the length direction of the wood grain. So pay attention when filling in the dimensions, so that the wood grain runs in the right direction!

Visibility quality underlayment B/C

The quality of plywood surface layers is indicated by letter combinations. There is a letter designation for the visible side (top) and one for the reverse side (bottom). This refers to the quality of the top veneer; the quality of the gluing, for example, is indicated differently. B/C is an example of a common quality for structural boards. In this, the first letter (in this case B) means the quality of the visible side and the second letter (in this case C) the quality of the reverse side. Read here more about all the viewing qualities.

This board material also has two different viewing sides. This is designated B/C. The top side has view quality B. With B quality, it indicates that the surface is closed and may contain minor repairs. These veneers are generally of limited suitability for decorative purposes. The underside is even coarser, this has sight quality C. At C-grade veneers are a normal quality for structural applications. In this, defects are allowed. Constructively, this is still a good board and is therefore often used as a construction board or packaging material.

Available thicknesses of Underlayment Radiata Pine B/C

Radiata pine underlayment can be ordered in different thicknesses. You can easily specify your desired thickness during the ordering process. That way, you can be sure that the panel material meets your requirements: both the format and the thickness of the material. The following thicknesses are available: 9 mm, 12 mm and 18 mm.

Machining of underlayment Radiata pine boards

Whitewood is easy to work with. Please note, however, that this board material discolours over time. Use an oil, varnish or stain to counteract discolouration. Lightly sand the material before varnishing. The ends may contain splinters, so give them extra attention. Finally, you can treat the ends with an edge sealer, because they are very rough. It is also important to pre-drill the sheet material. The sheet material can split.

Specific applications of Underlayment Radiata Pine B/C

Underlayment Radiata pine is a structural board with a low visual quality. This means that we do not recommend using this board material for visible work. It is, however, extremely suitable for floor covering, construction work or other projects where the material must be strong, but not visible. Use the material indoors only, to ensure long-term enjoyment of the board material.

Alternatives to Underlayment Radiata Pine B/C

Isn't Underlayment Radiata Pine B/C the right wood for your job? Then go for example for OSB or MDF, or go for underlayment Finnish spruce:

Recommended combinations

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects

Similar products

Complete your project