Solid three layers panel Cherry

Thuiswinkel Waarborg

Configure Solid three layers panel Cherry

Product information

  • Luxurious, warm appearance
  • Fairly stable sheet when it comes to warping
  • High quality
  • Easy to treat with a stain, lacquer or oil
  • Natural wood: discolours without treatment
  • Natural wood: may warp
  • For indoor use only
  • Watch out with iron, may discolour

Description

Cherry timberboard is a solid cherry sheet consisting of three layers. Cherry wood has a yellow-brown to red-brown appearance. These sheets are widely used for furniture with a luxurious appearance. This three-layer solid sheet has a flat surface, which creates the illusion of a solid sheet consisting of a single piece of wood.

Read more

All answers at a glance

Product properties

Specific gravity (kg/m3)750
AppearanceNatural
Visual gradingA/B
Thickness20 mm
Type Timberboards
VariantCherry solid three-layer panel
GrainYes, lengthwise
Application (climate)Indoors
Wood type of surface layerCherry
CorePlywood / triplex
Functional useOverall quality
ColourBeige / Brown
SidesYes
PrimedNo
BondingMR, Interior
Quality markFSC® 100%
Sheet structure3 layers
Top layer typeVeneer layer
Top layer2 sides

Order cut-to-size solid cherry timber board online

Easily order cut-to-size solid Cherry timber boards online. This way, you can create a robust and sturdy piece of furniture in your interior in no time at all. You can have our solid timber panels cut into various shapes and finishes. Whether you need an industrial table or want to add some warmth to your home with solid wall shelves, anything is possible. How handy is that?

Solid cherry: what is it?

Cherry is a hardwood species. If you treat the wood well, it will last for years. Cherry wood has a yellow-brown to red-brown colour that darkens over time. This sheet material has a warm and luxurious appearance which is often used in furniture and interior construction. Cherry wood is a type of wood made from the wild cherry. Cherry wood is a relatively stable sheet, provided you treat it well with a lacquer or stain first. Cherry wood is not suitable for outdoor use. A cherry sheet is also called a Cherry furniture board or timber board, although it is not finished at the sheet edges as standard.

The solid cherry boards in our range are of high quality. This can be deduced from the visual grading. The visual grading is indicated by letters, often a combination of two letters with a separator between them. This can be found in the product name or the product properties. The first letter represents the top of the sheet, the second for the bottom or backside. A/B thus describes the top and bottom of the sheet. A is the best visual grading.

 

Lumber Quality Indication
A Uniform colour. No knots and no heartwood allowed.
B Small colour nuances permitted. Tassels and heartwood may be present.
C Large colour nuances permissible. Tassels and heartwood are present.

Read here more about the quality of timberboards.

 

These solid boards are composed of three layers which are glued together crosswise. The two top layers are of high quality. The 5 mm thick top layers consist of falling wide sections of approx. 80 to 140 mm. The 10 mm thick core makes it a sturdy and stable whole. The core consists of the same wood as the top layers. In the core, all remaining material is processed that is not suitable for the visible sides: too short and too narrow wood, sapwood and other defects. The whole trunk is used, leaving almost no residual waste. Due to the 3-layer structure, this type of board is the most stable of all solid glued boards.

The direction of the wood grain

Timber board has a visible wood grain. The wood grain pattern always runs in the longitudinal direction. When sawing the sheet, we maintain that the longitudinal dimension is also the longitudinal direction of the wood grain. So be careful when filling in the measurements, so that the flames of the wood grain all run in the right direction!

Available thicknesses of solid cherry timber board

Solid timber boards can be ordered in various thicknesses. You can easily specify your desired thickness during the ordering process. This way you can be sure that the sheet material meets your requirements: both the size and thickness of the material. The following thickness(es) are available: 20 mm.

Machining solid cherry timber board

Cherry can turn grey when it comes into contact with iron or brass. It is therefore recommended to use stainless steel if you want to join metal with Cherry. Cherry wood can easily be sawn or milled, although it can splinter.

Once you have the sheet material in your home, we recommend that you first sand it with a fine grain (at least 180), so that the true colour of the wood appears. Sand the sheet and then finish it with a lacquer, stain, oil or varnish.

Specific applications of solid cherry timber board

European cherry are regularly used to make decorative furniture. Think of desks, chests, tables and dressers. It can also be used for interior panelling and stairs.

Alternatives to cherry timber board

Is Cherry not the right type of wood for your project or are you looking for a solid variant with a somewhat Scandinavian look? Then opt for massief essen timmerpanelen or massief esdoorn timmerpanelen. View our other solid wood types here:

Recommended combinations

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects