Timberboard Oak A/B - Joined staves

Thuiswinkel Waarborg

Configure Timberboard Oak A/B - Joined staves

Product information

  • Calm, warm appearance
  • High-quality oak with high visual grading
  • Warps less than solid wooden planks
  • Easy to treat with a stain, lacquer or oil
  • Even finger-jointed oak warps: planks can warp
  • Can discolour if it comes into contact with iron


Solid wooden sheets can be used for various pieces of furniture. Oak sheets are high-quality solid wooden sheets that can be used for luxurious tables, cabinets, shelves and other furniture. If you choose oak wooden sheet with visual grading A/B, you get wooden sheets with little to no knots or discolouration.

Read more

Product properties

Specific gravity (kg/m3)750
Visual gradingA/B
Thickness25 mm, 19 mm, 4 mm, 40 mm
Type Timberboards
VariantOak A/B - DL
Application (climate)Indoors
Base / Wood typeOak
Application (general)Constructive, Decorative
Quality markFSC® 100%
Top layer typeSolid
Top layerTo the core

Order Timberboard Oak A/B - Joined staves to size online

Easily order solid Timberboard Oak cut to size online. In no time, you can create a robust and sturdy piece of furniture in your interior. You can have our solid timber panels cut in various shapes and finishes. Whether you go for an industrial table or bring more warmth into your home with solid wall shelves, anything is possible. That's really convenient!

Timberboard Oak A/B - Joined staves: wat is dat?

Oak is known as a hard wood species. Therefore, if you treat the wood properly, it will last for years. Oak has a light brown colour that can be made darker by staining, varnishing or oiling it. Oak owes its popularity to its coarse flames and mirrors and the warm appearance of the material. The wood used in our boards comes from Ukraine, where the best wood is selected for making this board material.

Alternative terms for

An oak board is also called Timberboard Oak, although it is not finished at the end edges as standard.

Visibility quality of solid panels

The solid panels in our range are of high quality. This can be deduced from the visibility quality. The visible quality is indicated by letters, often a combination of two letters with a separator in between. This can be found in the product name or the product properties. The first letter stands for the top of the panel, the second for the bottom or back. A/B thus describes the top and bottom appearance of the panel. A is the best visibility quality. More information on the appearance quality can be found below.

Quality indication for Timberboard
ASmooth colour. No knots and no heartwood allowed.
BMinor colour nuances allowed. Brushes and heartwood may be present.
CLarge colour nuances allowed. Brushes and heartwood are present.

Read here more about lumber panel quality.

Joined staves

This panel is constructed from Joined staves. In this technique, several staves  of solid wood are placed side by side and glued together. The slats run in the same direction and along the full length of the panel.

The staves are carefully selected to ensure a good match in colour and grain pattern. They are then glued together with strong wood glue to form a solid panel. Often, the staves are also pressed together under high pressure to ensure the panel is solid and stable.


Timberboard shows a wood grain. The pattern of the wood grain always runs lengthwise. When sawing the board, we keep in mind that the length measurement is also the length direction of the wood grain. So pay close attention when entering the dimensions so that the grain of the wood all runs in the right direction!

Available thicknesses of solid Timberboard Oak

Solid Timberboards can be ordered in various thicknesses. You can easily indicate your desired thickness during the ordering process. This way, you can be sure that the board material meets your requirements: both the size and thickness of the material. The following thicknesses are available: 4 mm, 19 mm, 25 mm and 40 mm.

Machining solid Timberboard Oak

Always sand solid board material with a fine grit before working on it. Sanding oak makes for a beautiful end result, as it brings out the details of the pattern even more. Which benefits the robust, sturdy board. Should you wish to saw or mill the material, bear in mind that it may splinter. Finally, we recommend only using stainless steel when joining metal to prevent discolouration on the wood.

Wood absorbs moisture faster than it releases it, because of this property there is a risk of deformation, wood works! After the board has been sanded, it is important to treat the oak well with a lacquer, stain or oil.

Processing instructions

This panel is interior glued, which means that the furniture can only be used for indoor applications. Solid panels work in temperature differences and in humid conditions. It is important to always treat the solid panel properly right away with a lacquer, stain or oil to prevent warping.

Specific applications of solid Timberboard Oak

Oak can be used for a variety of applications. Get the industrial look at home by ordering an oak tabletop and fitting it with a steel base. You can also pimp up your current furniture by mounting a wooden top on it, for example a desk, TV cabinet or perhaps a kitchen worktop!

Besides cutting the material to size to the millimetre, you can also choose from various shapes and finishes. For example, if you have a round dining table in mind, choose the 'circle' shape, or go for a rectangle with rounded corners. Check out the available shapes and finishes that apply to the product, or see all the options on the shapes or finishes page.

Our solid joinery panels are only suitable for horizontal applications, for example table tops, window sills, etc. For vertical projects such as doors and room dividers, these solid panels are not suitable.

Solid Timberboard Oak alternatives

Is oak not the right type of wood for your job after all, or are you looking for a variant of solid with a slight Scandinavian look? Then go for ​​​​​​​massief essen timmerpanelen or massief esdoorn timmerpanelen. Check out our other solid wood species here.

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects