Project Blinds, by Jochem

Description

Had 2 parts of 185 cm by 18.0 cm sawn via opmaatzagen.nl, then the ends were mitered on both sides and mounted against the wall with 39 screws that we mounted on the bars every 30 cm.

Work description: how did you realize your project

Because we really wanted to have blinds above the sliding doors in our new home, but unfortunately the extension is made of HSB. And we only encountered plasterboard on the inside, we had to come up with a solution on the bars of the HSB to mount all that weight on the wall in the right way. It was also the intention that the tilt and tilt system of the sliding door can still work while the blinds are down, so that's why we used 40mm thick plywood for this.

Final size: What are the outer dimensions?

264.0 cm long, by 18.0 cm wide and 40 mm thick