Plywood Spruce Walnut American mix veneer

Thuiswinkel Waarborg

Configure Plywood Spruce Walnut American mix veneer

Product information

  • Lightweight
  • Completely formaldehyde-free
  • Made of several layers of spruce veneer with a walnut top layer
  • Each board has a unique appearance due to real wood veneer
  • Boards can differ in colour


Plywood Spruce Walnut American mix veneer is a plywood composed of spruce veneer layers with a natural top layer, thanks to the top layer of wood veneer with walnut. This top layer is composed of crown sawn walnut, in which the wood structure is clearly visible and gives it a warm appearance. Important: the top layers and ends are made of real wood and therefore still need to be treated.

Read more

Product properties

Specific gravity (kg/m3)400
Visual gradingA/B
Thickness15 mm
Type Plywood
VariantMultiplex Vuren Noten Amerikaans Dosse Gefineerd
Application (climate)Humid areas, if pre-treated
Base / Wood typePlywood
Application (general)Constructive, Decorative
KleurnuanceNatural / None
Top layer typeVeneer layer
Top layer2 sides

Order Plywood Spruce Walnut American mix veneer to size online 

Order cut-to-size Plywood Spruce Walnut American mix veneer easily online. Veneered Plywood can be cut to the millimetre. We deliver the panel fully custom-made to your home. Are you curious about the possibilities? Configure your product and you will have your project ready in no time.

Plywood Spruce Walnut American mix veneer: what is it?

Plywood panels are boards constructed from several layers of spruce veneer. In this case, a core of spruce and a top layer of noten fineer. It is standard waterproof glued and composed of several layers, depending on the thickness.

Plywood is composed of several layers of veneer. These layers are glued crosswise. This results in a stable board. Nevertheless, the wood glued together remains, during sawing and machining plywood can release tension which can cause longer boards to have a slight warp. For this reason, it is important to assemble these panels properly.

Plywood Spruce Walnut American mix veneer, sheet material with a natural surface layer

Unlike melaminated board material, the top layer of veneered panels is a layer of real wood. This gives the material a calm, natural look. Because it is a natural product, there may be colour and texture differences between different panels. No two panels are the same. In addition, it is important that this panel is finished with a lacquer or oil as desired. This prevents discolouration and preserves the top layer.

American walnut is worked with a lacquer or oil as desired. This prevents discolouration and preserves the top layer

Wood veneer with American walnut appearance has a warm and rich aesthetic, characterised by a deep brown colour with striking dark veins and stripes. The veneer often displays a distinctive grain pattern with contrasting lighter and darker tones.

The appearance of American walnut veneer is classic and timeless, making it suitable for a variety of interior styles. The colour of the veneer usually ranges from medium brown to dark brown, sometimes tending towards a hint of red, depending on the specific source and treatment of the wood.

American walnut wood veneer is often appreciated for its elegant and refined appearance, and it can be used for furniture, cabinets, interior finishes and decorative elements. Its distinctive grain pattern and deep, warm colour allow American walnut veneer to be integrated into a variety of designs, from traditional to contemporary, adding a sense of luxury and timeless beauty to interiors.

Crown cut or Quartered veneer

Sawing logs is usually done in two different ways: crown or quartered. When the wood is cut crown, long slices are cut lengthwise. This allows the flames of the material to be clearly seen and makes the best use of the wood. In mix, these two techniques are processed interchangeably and used during veneer assembly. This creates a natural whole and each slab is unique.

Available thicknesses Plywood Spruce Walnut American mix veneer

With us, you order high-quality veneered plywood made to measure and in various thicknesses. You can easily specify the desired thickness in the product configurator. This ensures that the plywood meets your requirements: both in terms of size and thickness. The following thicknesses are available: 15 mm.

Editing Plywood Spruce Walnut American mix veneer boards

This sheet material is easy to work with. Make sure you have sharp tools to minimise splintering. For drilling holes, we recommend a wood drill with a centre point. Pre-drilling is recommended, but not necessary. This board material may discolour over time, so finish it with a (clear) lacquer, stain or paint. Use an edge sealer to finish the edges of the plywood, this will prevent the lacquer or stain from soaking into the plywood, which could lead to the veneer layers coming loose.

Specific applications of veneered oak

Plywood is very suitable for joinery and decorative applications such as cabinets or other furniture. Depending on the thickness of the board material, it is important to assemble the panels properly. In that case, they are suitable for any finishing application you have in mind.

Alternatives for Plywood Spruce Walnut American mix veneer

Is Plywood Spruce Walnut American mix veneer not the right type of wood for your job after all? Looking for other plywood with a grain? Then go for poplar plywood. Do you want boards that can be used outdoors? Check out phenolic plywood, MDF tricoya or multiplex okoume. Or see our other veneered panel materials here:   

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects