Timberboard Cherry

Thuiswinkel Waarborg

Configure Timberboard Cherry

Product information

  • Luxurious, warm appearance
  • Fairly stable sheet when it comes to warping
  • High quality
  • Easy to treat with a stain, lacquer or oil
  • Natural wood: discolours without treatment
  • Natural wood: may warp
  • For indoor use only
  • Watch out with iron, may discolour


Cherry timberboard is a solid cherry sheet consisting of long finger-jointed parts. Cherry wood has a yellow-brown to red-brown appearance. These sheets are widely used for furniture with a warm appearance. Over time, cherry wood darkens, further enhancing the luxury and elegance of this sheet material.

Read more

Product properties

Specific gravity (kg/m3)750
Visual gradingA/B
Thickness26 mm, 40 mm
Type Timberboards
VariantTimberboard Cherry
Application (climate)Indoors
Base / Wood typeCherry
Application (general)Constructive, Decorative
ColourRed (wood)
BondingMR, Interior
Quality markFSC® 100%
Sheet structureFinger-jointed slats
Top layer typeSolid
Top layerTo the core

Easily order cut-to-size solid cherry timber board online

Easily order cut-to-size solid Cherry timber boards online. This way, you can create a robust and sturdy piece of furniture in your interior in no time at all. You can have our solid timber panels cut into various shapes and finishes. Whether you need an industrial table or want to add some warmth to your home with solid wall shelves, anything is possible. How handy is that?

Solid cherry: what is it?

Cherry is a hardwood species. If you treat the wood well, it will last for years. Cherry wood has a yellow-brown to red-brown colour that darkens over time. This sheet material has a warm and luxurious appearance which is often used in furniture and interior construction. Cherry wood is a type of wood made from the wild cherry. Cherry wood is a relatively stable sheet, provided you treat it well with a lacquer or stain first. Cherry wood is not suitable for outdoor use. A cherry sheet is also called a Cherry furniture board or timber board, although it is not finished at the sheet edges as standard.

Quality grading for timber board

Timber board comes in different qualities. This does not mean that the sheet is more or less strong, it indicates the quality of the appearance of the sheet . The quality can be found in the product properties. More information about the visual grading below.

The solid cherry boards in our range are of high quality. This can be deduced from the visual grading. The visual grading is indicated by letters, often a combination of two letters with a separator between them. This can be found in the product name or the product properties. The first letter represents the top of the sheet, the second for the bottom or backside. A/B thus describes the top and bottom of the sheet. A is the best visual grading.

Lumber Quality Indication
AUniform colour. No knots and no heartwood allowed.
BSmall colour nuances permitted. Tassels and heartwood may be present.
CLarge colour nuances permissible. Tassels and heartwood are present.

Read here more about the quality of timberboards.

The solid sheet material is made up of slats. Slats are small wooden planks made entirely of pure wood. To be able to make a sheet of a larger size, several slats are combined into one large sheet. This results in a very solid and strong sheet. Keep in mind that no slat has the same appearance. The wood structure and colour of each slat is unique and can therefore also deviate from the image. Our solid sheets are interior bonded, which means that the material can only be used indoors.

The direction of the wood grain

Timber board has a visible wood grain. The wood grain pattern always runs in the longitudinal direction. When sawing the sheet, we maintain that the longitudinal dimension is also the longitudinal direction of the wood grain. So be careful when filling in the measurements, so that the flames of the wood grain all run in the right direction.

Available thicknesses of solid cherry timber board

Solid timber boards can be ordered in various thicknesses. You can easily specify your desired thickness during the ordering process. This way you can be sure that the sheet material meets your requirements: both the size and thickness of the material. The following thicknesses are available: 26 mm and 40 mm.

Machining solid cherry timber board

Cherry can turn grey when it comes into contact with iron or brass. It is therefore recommended to use stainless steel if you want to join metal with Cherry. Cherry wood can easily be sawn or milled, although it can splinter.

Once you have the sheet material in your home, we recommend that you first sand it with a fine grain (at least 180), so that the true colour of the wood appears. Sand the sheet and then finish it with a lacquer, stain, oil or varnish. Read all processing instructions of timber board .

Specific applications of solid cherry timber board

European cherry are regularly used to make decorative furniture. Think of desks, chests, tables and dressers. It can also be used for interior panelling and stairs.

Alternatives to cherry timber board

Is Cherry not the right type of wood for your project or are you looking for a solid variant with a somewhat Scandinavian look? Then opt for massief essen timmerpanelen or massief esdoorn timmerpanelen. View our other solid wood types here:

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects