Storage space under a sloping roof for the attic, by Ruud

Everyone knows the problems that a pitched roof in an attic entails when that space has to be used to store things. I have chosen to make a storage cupboard from which six parts can be wheeled out from under the sloping hood. This way you have excellent access to all your stuff without having to crawl on your stomach at the bottom of a closet. The whole is based on the sizes of the blue crates, of which I had a set.

The working drawing can be seen as an image. The sawn parts were all perfectly tailored, so it was a matter of putting a cupboard on its side to get an idea of the end result (see photo). Then carefully mark on the sawn parts of 1 cabinet where the screw holes should be. then drill the holes. The parts of the first cabinet are used as molds for the other five. Then put everything together with wood glue and screws. It looked like a kit.

1 part is 100.0 cm deep, 105.0 cm high and 55.0 cm wide. In total there are 6 parts next to each other.