Create this project yourself with sheet material cut to size by TOSIZE.ie!
Slide doors under the sloping roof. HPL plates have been dismantled, these were already dismantled a year ago when we moved into this new rental house. Hanging rail system from Mac Lean mounted with plastic under guide.
Realize sliding doors
HPL disassembled with multitool these were stapled and glued to a frame of 2s and 3s supporting the roof caps. Several sketches were made to achieve this result. Measured and ordered everything twice. After receiving the wood fit stored in the same room and on slats to allow the wood to acclimatize. All the wood has been treated twice with clear acrylic lacquer (satin gloss). The 2 liter can is empty. For the first and between the 1st and 2nd layer is degreased and sanded. With the exception of the cove, everything is blind mounted.
The dimensions of the project
The outer dimensions are: 291.0 x 159.0 (W x H) A sliding door is: 141.6 x 61.0 (H x W) Dimensions are in cm.
Want to make this DIY project? Check out Jan's saw list and complete your order easily.