DIY wooden headboard for your bedroom, by Niels

For our new bed I made a headboard of wooden slats. This to give our bedroom and new bed a nice look.

First placed an order of Poplar Plywood. Then put all slats in an interior stain and hammered into 3 connecting slats in the bedroom with 2.0 cm spacing. These connecting slats are then drilled to the wall with 6 screws. Then the skirting board was removed from the wall and it was finally mounted on the wall after the headboard was placed. This ensures a sleek finish to the room. The bed is then placed 2.0 cm from the headboard so that the electrically adjustable chassis can be raised and lowered without any problems.

Width of the total headboard: 240.0 cm Height: 130.0 cm Slats: 5.0 cm x 130.0 cm