- TOSIZE.ie
- Do it yourself
- DIY Projects
Drawers for shelves, from Martin
Create this project yourself with sheet material cut to size by TOSIZE.ie!
Martin
Easy
2 minutes
I built the shelf from leftovers and a few purchases from the hardware store and the boards for the drawers were ordered to size from TOSIZE. The dimensions of the wood (multiplex interior poplar 12+18mm) were precisely cut and could be used without any reworking. The quality of the wood was (as expected/desired) mediocre (just poplar) but sufficient for the purpose. Two panels were “patched” with filler. But it didn't bother me. I saved almost 50eu by going to the hardware store around the corner and the transaction went without any problems. All in all, I can recommend TOSIZE and will certainly use it again. Thank you very much and a good start to the new year 2022
- first everything was measured and marked - then the panels were placed together using a 90 degree gauge and clamped. - then extinguishers were drilled or pre-drilled from the side where the screws were being screwed - then the panels were loosened again - then the connections were also added Wood glue was applied - then the panels were reconnected - then the pre-drilled extinguishers were re-drilled over the entire length into the panels of the side walls in the screwing direction - finally everything was screwed together. First the frame / then the floor / the whole thing four timesFERTSCH
700x400x400700x400x200700x400x150700x400x100
How next?
Want to make this DIY project? Check out Martin's saw list and complete your order easily.
€ 237,58
View all sheet materials