Create this project yourself with sheet material cut to size by TOSIZE.ie!
Finishing/planks for the toilet To complete and finish the toilet we made two (hollow) miter planks Berken multiplex Once to finish the tiled wall and the second shelf as a carrier for our own poured concrete fountain.
Finish the toilet with Multiplex Birch
To complete and finish the toilet, we made two (hollow) mitred planks from Birch plywood. Once to finish the tiled wall and the second shelf as a carrier for our own poured concrete fountain. We made a frame from the thicker plywood ordered so that the planks do not sag. In principle, the rest was perfectly tailored and we only had to glue the planks. Two holes in it for the tap and drain was enough. The top shelf is blindly sealed with mounting kit and the shelf for the fountain shelf is screwed into the wall. The planks were then oiled. (2x)
The dimensions of the project
Toilet shelf: 100.0cm x 25.0cm x 5.0cm Fountain shelf: 75.0cm x 16.2cm x5.0cm (front)/10.0cm (back against the wall)
Want to make this DIY project? Check out Joost's saw list and complete your order easily.