DIY: bathroom furniture and colonization, by Mai

Since we have a small apartment with a mini bathroom, we have to make smart use of the space to maximize storage space. That is why we have custom made a column cabinet and bathroom furniture.

After measuring everything properly, we ordered all pieces to size with the help of TOSIZE.com. The bathroom furniture is made of okoume plywood 18mm, with fronts of birch plywood. The column cabinet is made entirely of 18mm birch plywood. We simply measured, pre-drilled and screwed all the holes together. Not much different than putting together an Ikea cabinet, except that you have to measure and pre-drill the holes yourself. We attached the fronts to the cabinets with Softclose Concealed Hinges (holes drilled with 35mm concealed hinge attachment). We have also mounted push to open push snaps. Then everything was sanded and finished with wood seal pro, to make it water resistant. we found it relatively easy and this was our first job ever!

The lower part of the bathroom furniture is about 180.0 cm wide (wall to wall) and 41.0 cm deep, 70.0 high, with legs of 11.0 cm underneath. The column cabinet is about 160.0 cm above that. high.